13. Tape drives

13.1 Supported

• SCSI tape drives
  (From the SCSI HOWTO) Drives using both fixed and variable length blocks smaller than the driver buffer length (set to 32k in the distribution sources) are supported. Virtually all drives should work. (Send mail if you know of any incompatible drives.)
• QIC-02 drives
• Iomega DITTO internal (ftape 3.04c and newer)

13.2 Others

• QIC-117, QIC-40/80, QIC-3010/3020 (QIC-WIDE) drives
  Most tape drives using the floppy controller should work. Various dedicated controllers (Colorado FC-10/FC-20, Mountain Mach-2, Iomega Tape Controller II) are also supported
  ftp://sunsite.unc.edu/pub/Linux/kernel/tapes
• ATAPI tape drives
  For these an alpha driver (ide-tape.c) is available in the kernel. ATAPI tape drives supported are
  • Seagate TapeStor 8000
  • Conner CTMA 4000 IDE ATAPI Streaming tape drive

13.3 Unsupported

• Emerald and Tecmar QIC-02 tape controller cards - Chris Ulrich < [email protected]>
• Drives that connect to the parallel port (eg: Colorado Trakker)
• Some high speed tape controllers (Colorado TC-15)
• Irwin AX250L/Accutrak 250 (not QIC-80)
• IBM Internal Tape Backup Unit (not QIC-80)
• COREtape Light